- MADE IN USA
- 13,850 BTU/H – 1.15 Ton capacity air-cooled
- Compact yet Powerful
- Runs on 115V 15 amp circuit
- Wide Operating range of 60ºF-110ºF
- ETL and CETL listed to UL and CSA standards
- Includes KwiKool’s Exclusive I/O Integral Condenser where both inlet and outlets are ductable, without costly and bulky add-on kits
- Multi-function microprocessor control with a large, easy-to-read LCD display
- Easy-touch control pads make changing system settings a snap
- Self-Diagnostics that include audible alarm and LCD visual display readout for system fault conditions
- Input/Output Alarm Contacts for connection to building systems
- Internal high lift condensate pumps and a 5- gallon reservoir tank for total condensate flexibility.
- Condensate overflow protection
- Three fan speeds
- Auto speed- automatically sets fan speed based on heat load demand (not available on single speed models)
- Thermostatic Expansion Valve
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- High-pressure safety with manual reset
- Low-pressure safety with automatic reset
- Automatic freeze protection using hot gas bypass and fan cycling
- Low ambient controls
- Heavy-duty locking casters
- Rifle tube coils for efficient heat transfer
- Fully insulated, heavy duty galvanized steel cabinet with KwiKool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance and quiet operation
- Sight glass with moisture indicator
- Filter dryer for Moisture protection
- Easy access Service Door
- Shraeder service ports
- Model: KIB1411
Specifications
COOLING CAPACITY | ||
BTU/hr @ 95F at 60% RH | 13,800 (1.1-Ton) | |
COMPRESSOR DATA | ||
Compressor Type | Hermetic Rotary | |
Operating Temperatures | 60-110 F 50%RH | |
Refrigerant | 410A | |
FAN DATA | ||
Evaporator | ||
Fan Type (Centrifugal) | Direct Drive | |
Air Flow (CFM) | 460/3 Speed | |
Supply Air Device | Adjustable Vent | |
Supply Air Chute Kit (optional) | 2 - 5" Dia. x 16" Length | |
Condenser | ||
I/O Integral Condenser | Balanced Air Flow | |
Fan Type (Centrifugal) | Direct Drive | |
Air Flow (CFM) | 700 | |
Condenser Duct Specs (optional) | 2 - 12" Dia. x 8' Length | |
Condenser Duct Max. Length | 25' | |
ELECTRICAL DATA | ||
Power Supply (Volts) | 115 Single Phase | |
Current Consumption (Amps) | 12.8 | |
Power Consumption (kW) | 1.35 | |
Maximum Circuit Breaker (Amps) | 20 | |
Recommended Breaker Size | 15 or 20 | |
Minimum Circuit Ampacity (Amps) | 19.575 | |
Min./Max. Voltage | 105-125 | |
Power Cord Gauge/Length | 14/6' | |
Plug Configuration | NEMA 5-15 | |
DIMENSIONAL DATA | ||
Width x Depth x Height (Inches) | 16.325" x 36" x 37.25" | |
Weight (Lbs.) | 195 | |
Shipping Weight (Lbs.) | 245 | |
Ceiling Kit Weight (Lbs.) | 38 | |
Shipping Weight w/ Ceiling Kit | 283 | |
SAFETY DEVICE DATA | ||
Compressor Overload | Internal | |
Fan Motor Overload | Automatic Internal | |
Evaporator Freeze Protection | Hot Gas Bypass | |
High Pressure Switch | Manual | |
Low Pressure Switch | Automatic | |
Compressor Short Cycle | Yes | |
Automatic Restart | Yes | |
Thermostat Type | Microprocessor/Digital | |
Condensate Pump Overflow | Yes | |
Condensate Tank Overflow | Yes |