- MADE IN USA
- 23,500 BTU/H – 2 Ton capacity air-cooled
- Compact yet Powerful
- Runs on 115V 20 amp circuit
- Wide Operating range of 60ºF-110ºF
- ETL and CETL listed to UL and CSA standards
- Includes KwiKool’s Exclusive I/O Integral Condenser where both inlet and outlets are ductable, without costly and bulky add-on kits
- Multi-function microprocessor control with a large, easy-to-read LCD display
- Easy-touch control pads make changing system settings a snap
- Self-Diagnostics that include audible alarm and LCD visual display readout for system fault conditions
- Input/Output Alarm Contacts for connection to building systems
- Internal high lift condensate pumps and a 5- gallon reservoir tank for total condensate flexibility
- Condensate overflow protection
- Thermostatic Expansion Valve
- Heavy duty compressor with automatic restart and short cycle protection
- Motors and compressors have overload protection
- High-pressure safety with manual reset
- Low-pressure safety with automatic reset
- Automatic freeze protection using hot gas bypass and fan cycling
- Low ambient controls
- Heavy-duty locking casters
- Rifle tube coils for efficient heat transfer
- Fully insulated, heavy duty galvanized steel cabinet with KwiKool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance and quiet operation
- Sight glass with moisture indicator
- Filter dryer for Moisture protection
- Easy access Service Door
- Shraeder service ports
- Model: KIB2411
Specifications
COOLING CAPACITY | ||
BTU/hr @ 95F at 60% RH | 23,500 (2-Ton) | |
COMPRESSOR DATA | ||
Compressor Type | Hermetic Recip. | |
Operating Temperatures | 60-110 F 50%RH | |
Refrigerant | 407C | |
FAN DATA | ||
Evaporator | ||
Fan Type (Centrifugal) | Direct Drive | |
Air Flow (CFM) | 725/1 Speed | |
Supply Air Device | Adjustable Vent | |
Supply Air Chute Kit (optional) | 2 - 6" Dia. x 18" Length | |
Condenser | ||
I/O Integral Condenser | Balanced Air Flow | |
Fan Type (Centrifugal) | Direct Drive | |
Air Flow (CFM) | 1050 | |
Condenser Duct Specs (optional) | 2 - 14" Dia. x 8' Length | |
Condenser Duct Max. Length | 25' | |
ELECTRICAL DATA | ||
Power Supply (Volts) | 115 Single Phase | |
Current Consumption (Amps) | 15.9 | |
Power Consumption (kW) | 1.65 | |
Maximum Circuit Breaker (Amps) | 30 | |
Recommended Breaker Size | 20 | |
Minimum Circuit Ampacity(Amps) | 21.2 | |
Min./Max. Voltage | 105-125 | |
Power Cord Gauge/Length | 12/6' | |
Plug Configuration | NEMA 5-20 | |
DIMENSIONAL DATA | ||
Width x Depth x Height (Inches) | 20.325" x 41" x 43.5" | |
Weight (Lbs.) | 311 | |
Shipping Weight (Lbs.) | 361 | |
Ceiling Kit Weight (Lbs.) | 47 | |
Shipping Weight w/ Ceiling Kit | 408 | |
SAFETY DEVICE DATA | ||
Compressor Overload | Internal | |
Fan Motor Overload | Automatic Internal | |
Evaporator Freeze Protection | Hot Gas Bypass | |
High Pressure Switch | Manual | |
Low Pressure Switch | Automatic | |
Compressor Short Cycle | Yes | |
Automatic Restart | Yes | |
Thermostat Type | Microprocessor/Digital | |
Condensate Pump Overflow | Yes | |
Condensate Tank Overflow | Yes |